PAINT


SCROLL DOWN

PAINT


PRODUCTS + APPLICATION


PRODUCTS + APPLICATION


PRODUCTS + APPLICATION

PRIME COAT

  • Sheetrock substrate: Sherwin Williams- ProMar 200 Zero VOC Latex Primer, B28W2600, at 4.0 mils wet, 1.5 mils dry.
  • Concrete/ concrete block substrate: Sherwin Williams- S-W PrepRite Block Filler, B25W25, at 100 to 200 sq. ft. per gal (2.4 to 4.9 sq. m per l).
  • Wood substrate: Sherwin Williams- PrepRite ProBlock Primer Sealer, B51-620 Series, at 4.0 mils wet, 1.4 mils dry
  • Metal substrate: Sherwin Williams- S-W Pro Industrial Pro-Cryl Universal Primer, B66-310 Series, at 5.0 to 10 mils wet, 2.0 to 4.0 mils dry

TOP COAT

  • Units + Low Traffic Common Areas:
    • All Substrates, except metal: 
      • Sherwin Williams- ProMar 200 Zero VOC Latex, B31-2600 Series, at 4.0 mils wet, 1.6 mils dry, per coat.
  • High Traffic Common Areas + Metal Substrates:
    • All elevator walls, handrails, and doors in common areas. 
      • Sherwin Williams- Pro Industrial Waterbased Alkyd Urethane Enamel, B53-115- Series, at 1.4-1.7 dry, per coat. 
 

PREPARATION:

  • Remove hardware, covers, plates, and similar items already in place that are removable and are not to be painted.
  • Clean substrates of substances that could impair bond of paints, including dust, dirt, oil, grease, and incompatible paints and encapsulates.
  • Using a damp sponge or cloth, wipe to remove the surface dirt and marks and any excess cleaner. For difficult stains, some scrubbing may be necessary.
  • Do not allow the cleaner to dry on the surface.
  • Review hazardous material O&M for locations of lead paint or asbestos-containing substrate. Any work on these surfaces must follow directions in O&M.

APPLICATION:

  • Apply paint in accordance with manufacturer's directions. Use applicators and techniques best suited for substrate and type of material being applied.
  • Apply paints only when temperature of surfaces to be painted and ambient air temperatures are between 50 and 95 deg F
  • Brush: Use a nylon/polyester brush.
  • Roller: Use a 3/8" - 3/4" nap synthetic cover.
  • Spray—Airless:
    • Pressure: 2000 psi
    • Tip: 017"-.021"
 

UNIT PAINT


UNIT PAINT


unit paint COLORS

WALLS:

Sherwin Williams 6378
Crisp Linen
Eggshell

CEILINGS:

Sherwin Williams
7002
Downy
Flat

TRIM:

Sherwin Williams
7102
White Flour
Semi-Gloss

DOORS:

Sherwin Williams
7102
White Flour
Semi-Gloss

 
 

COMMON PAINT


COMMON PAINT


COMMON AREA paint

NEW CONSTRUCTION + REHAB:

  • Architect to provide paint design for all interior common areas.
    • Paint design should include colored floor plan.

PROPERTY MANAGEMENT:

  • Contact Design + Building Performance Dept. for design support.
  © Johnsonite

© Johnsonite

 © Johnsonite

© Johnsonite

  ©   Armstrong

© Armstrong

 

VARIANCE FORM


VARIANCE FORM


paint VARIANCE

Please fill out the following form to submit for a variance.

GENERAL INFORMATION
Name *
Name
VARIANCE REQUEST
What location(s) are you seeking an alternate product or supplier for?
In-Unit:
Common Space:
ALTERNATE PRODUCT INFORMATION
Please provide alternate product specification and quote from supplier in order to confirm compliance with base standards.
Does the proposed paint contain Volatile Organic Compounds (VOCs)? *
http://