DOOR ACCESSORIES

PEEP HOLES:

• To be provided at building entry doors and unit doors. ADA units shall be provided with two (2) peep holes, one at standing height and one in accordance with the ADA standards.

SAMPLE PRODUCT:

This sample product is NOT required to be used in new construction or rehab projects as long as the specified product(s) complies with the performance criteria noted above.

HARDWARE:

GENERAL INFORMATION AND REQUIRED DETAILS:

• All public, common area and ADA unit doors shall be equipped with lever type hardware or hardware that meets ADA/UFAS design standards.

• Floor mounted door stops to be installed at all doors

• Finish: all hardware to be brushed aluminum, or satin chrome.

• Anti-pick latches with single action lever.

• Keying for common spaces and unit entries:

  • Key tree to be reviewed by POAHC.

  • No grand master key for dwelling units.

  • Include 4-5 cores as additional stock for unit entry doors to accommodate unit turns.

• Site staff to use HandyTrac key control system.

• Main building entries to be equipped with Knox Box rapid entry system for local fire department.

UNIT ENTRANCE (FROM EXTERIOR + FROM CORRIDOR):

• Doors shall be equipped with interlocking mortise lock sets. Operation of the lock set shall include to following features:

  • From exterior of unit entrance, key unlocks both dead latch and deadbolt.

  • From interior of unit entrance, turning knob disengages both dead latch and deadbolt at the same time.

SAMPLE PRODUCT:

This sample product is NOT required to be used in new construction or rehab projects as long as the specified product(s) complies with the performance criteria noted above.

UNIT BEDROOMS, CLOSETS & PASSAGE DOORS:

• Use levered handles; no knobs.

• No locks.

SAMPLE PRODUCT:

This sample product is NOT required to be used in new construction or rehab projects as long as the specified product(s) complies with the performance criteria noted above.

UNIT BATHROOM DOORS:

• Use levered handles; no knobs.

• Required: lock with "pin-hole" reset.

SAMPLE PRODUCT:

This sample product is NOT required to be used in new construction or rehab projects as long as the specified product(s) complies with the performance criteria noted above.

UNIT MECHANICAL CLOSETS:

• Use levered handles; no knobs.

• Required: lock with key for site personnel only.

• Need to be secured and accessed by site personnel only.

SAMPLE PRODUCT:

This sample product is NOT required to be used in new construction or rehab projects as long as the specified product(s) complies with the performance criteria noted above.

ATTIC HATCHES:

• Access to attic areas for maintenance and/or inspection shall be outside of the dwelling unit, where possible.

  • If inside, access doors will be insulated and furnished with key locks and fire rated where required.

storm doors:

• Unit entrance doors, which open directly to the exterior of the building, shall be equipped with storm doors with screens.

  • Storms and screens must be stored within the door and require no storage of panels during winter or summer.

  • Preferred: Larson Duratech surface - window and screen.

SAMPLE PRODUCT:

This sample product is NOT required to be used in new construction or rehab projects as long as the specified product(s) complies with the performance criteria noted above.